ISO 16409 Manual interdental brushes

The toothbrush EN ISO 16409:2006 + A1:2010 contains the durability test of the stem, the test of stem retention and filament retention.

The test unit includes all 3 tests, the movement mechanism and brackets.

A detailed description of the respective tests, see:

- Filament Retention

- Stem Retention

- Durability of the core wire

Device Durability Test    308-100

- 1 Device + Jig + Load
- 1 Power Cord CEE 16A (5 m)
- 1 Operating Intruction

The EN ISO 16409:2006 + A1:2010 contain the test of the passable hole diameter, the durability of the filaments in the stam and the test of the pull-out force of stem in the handle.
The measuring plate is made of stainless steel with a thickness of (2.0 ± 0.1) mm. The measuring plate has a total of 30 holes with no sharp edges with a diameter of 0.6 mm up to 3.5 mm in increments of 0.1 mm. The Tolerances on hole diameter equal to ± 0.02 mm.
The measuring plate can be clamped in a tensile testing machine supplied with a clip to hold the brush for the pull-out force measurement.

Measure Plate  + Clamp          308-020

1 Measure Plate
1 Clamp

Delivery: EXW
Shipping time: by arrangement

Technical changes reserved.

The illustrations may differ from the actual equipment.

All data without obligation and not-binding.