Amalgam Creep Test ISO 24234
- Simple, intuitive operation through procedure templates, minimum
- Dust and splash-proof touchscreen
- Modern Design & Technology: linear guidance technology with stepper
motor ensure high precision in distance and speed
- Documented exporting the resulting data with test parameters and details
to samples on USB in CSV format
- Two user access levels: supervisor and operator.
Access level can be protected with a password
- Independent, fully operational system,
requires no computer and no software installation
Dental amalgam used as a restorative
The international standard 24234 describes test methods for amalgam alloys.
This test analyze the creep, the change in length during curing.
The test contains 3 test stations . The sample is heated by a metal block at 37° C and kept at this temperature during the test. The pressure of 36 MPa is applied by a load lever structure. 3 sensors measure the change in length .
The test runs fully automatic and calculated the creep in %. The result is shown in the display. The temperature and measurement times can be adjusted..
The automation of the test sequence and the functional structure of the software allows an easy operation. Thees reduce the user impact and improve the reproducibility of the results.
Due to compact construction this test stand is ideal for laboratory use .
NOTE: The sample can be manufactured with a Amalgam
|Dimension (W,D,H)||ca.400, 300, 300 mm|
|Power Supply||115/230 (50/60 Hz)|
|Heating Power||4x80 W|
|Temperature of the Sample||23°C auf 37°C in < 5 min|
|Amalgam Creep Test||423-010|
|Amalgam Die Set||466-010|
Scope of Delivery
1 Power Cord CEE 16A (5 m)
1 Operating Instruction
Conditions of Delivery
Shipping time: by arrangement
The illustrations may differ from the actual equipment.