This device tests the temples and hinges of a spectacle.
The spectacle is clamped at the bridge and loaded with a defined force. It can be set the bending angle or the bending force as test condition. Furthermore, the load, load- and relaxing time and the number of cycles can be set.
The both temples and hinges are loaded at the same time.
Glasses of different sizes can be clamped.
The hangers as well as the hinges are loaded and tested. Both brackets are loaded simultaneously.
The device contains a PLC with touch screen for control.
- Simple, intuitive operation through procedure
minimum Operator training
- Dust and splash-proof touchscreen
|Dimension (W, D, H) ca.||ca.400, 300, 400 mm|
|Test Angle||10-160 °|
|Load||bis 60 N|
|Test Cycle max.||0 - 999999|
|Test Frequency||0 – 30 rpm|
|Power Supply||115/230 (50/60 Hz)|
1 Power Cord CEE 16A (5 m)
1 Operating Instruction
1 Maintenance unit for the pneumaitc air
|Spectacle Spring Test||640-010||8.000,-€|
Shipping time: by arrangement
Technical changes reserved.
The illustrations may differ from the actual equipment.
All data without obligation and not-binding.
The prices quoted are net prices.