Temperature cycle test for artificial aging of dental samples

Oral Care Prüfung Test Equipment Zahnbürste Zahnnseide Dentalwerkstoffe Dentalinstrumente Brillen Spritzen Toothpaste manual Toothbrush Powerbrush Toothcleaning interproximal Brush Test Euquipment Zahnbürste Zahnpasta Handzahnbürsten elektrische Zahnbürst

künstliche Anlterung Zahnbürste dental Werkstoffe Instrumente Brillen Toothpaste manuel Brush Powerbrush dental Material ISO 20126 20127 28158 14569 16409 8627 22254 5136 11609 4823 14536 21563 10873 4049 6874 Temperatur Cycle Wear Stiffness Fatigue


This device simulate a artificial aging of dental samples by a temperature cycling test. For this, the sample is immersed with a sample basket alternately in a hot water bath and a cold water bath. The typical use in the field of dental research is the implementation of aging simulations of dental implants. The device contain a SPS control, a keypad to enter the test parameters and a display for indicating the current cycle number and remaining time. Immersion times, dripping and number of cycles can be adjusted. The machine is completely made of stainless steel to avoid corrosion. The end position after the test can be adjusted (cold/hot bath, air). Different processes can be saved.
Due to the compact construction this device is ideal for laboratory use .

Processes can also be edited and managed on a PC Software.
The data is transferred to the PLC via an Ethernet interface.



- Simple, intuitive operation through  procedure templates, minimum
  Operator training
- Dust and splash-proof touchscreen
- Modern Design & Technology: linear guidance technology with stepper
  motor ensure high precision in distance and speed
- Documented exporting the resulting data with test parameters and details
  to samples on USB in CSV format
- Independent, fully operational system,
  requires no computer and no software installation



Dimension (W, D, H) ca.   800 mm, 600 mm, 450 mm
Weight   15 kg (without bathes)
Immersion Time    Hot Bath 0 - sec.
  Cold Bath 0 - sec.
  Drip Time 0 - sec.
allowable Sample Mass ca.   500g
Mesh sample basket   10x10x10cm
Number of Cycles   1 bis 21.000
Power Supply   115/230 (50/60 Hz),max. 60W

Spezification Cold Bath

Cooling Power   200W
Temperatur Range   -5°C bis 100°C
Capacity   11 - 15 Liter
Dimension: ca.   W273,H711,D483mm
Weight   40kg
Power Supply:   230V~, 500W

Spezification Hot Bath

Heating Power   2kW
Temperatur Range   25°C bis 100°C
Capacity   8 - 15 Liter
Dimension: ca.   B381x,H457,T456mm
Weight   14kg
Power Supply   230V~, 2kW


Pivoting mechanism   413-030     6.400,-€
Pivoting mechanism with water baths   413-010   19.000,-€
Balls   413-030    

Scope of Delivery



1   swivel device with control and sample basket
1   Heating Bath with thermostat
1   Cold bath with thermostat and immersion cooler
1   compensation tube between baths
100 Balls (100 pcs Ø20mm per bath) against evaporation
1   Operating Instructions
3   Power Cord CEE 16A (5 m)



automatic refill                                         413-100     500,-€

Conditions of Delivery

Delivery: DAP
Shipping time: by arrangement

Technical changes reserved.

The illustrations may differ from the actual equipment.

All data without obligation and not-binding.

All prices are net prices.